Sunner Products
1n0o























1n0o
 

  Welcome to Hi-tech Industrial Implements - Sunner Products

SUNNER INDIA MACHINES ranging from 0.75 to 2.5 H.P. and also with single phase and three-phase range.

Single Speed Machine
Type
12000RPM
8000RPM
5800RPM
2800RPM
Single phase, 0.75 HP FAS U75 FINISH U75   FLEX U75
Single phase, 1 HP UNIFAS UNIFINISH   UNIFLEX
3 Phase, 1 HP FAS 100 FINISH 100   FLEX 100
3 Phase, 1.5 HP FAS 150 FINISH 150 FETTLE 150 FLEX 150
3 Phase, 2.5 HP ROBO FAS ROBO FINISH ROBO FETTLE ROBO FLEX

Multi Speed Machines
3 Phase 1 HP
Fera
 12000, 8000, 5700, 3200, 2100, 1600 & 850 RPM
Tetra
 12000, 8000, 5700 & 3200 RPM
Trio
 12000, 8000 & 5700 RPM
Roto 128
 12000 & 8000 RPM
Roto 573
 5700 & 3200 RPM
 
SELECTION AND APPLICATION
Model
Horse Power
Type & RPM
Power Supply required
Shaft sizes
Rotofas U75
0.75
Single Speed Gear Machine 12,000 RPM
220/230 Volts Single phase 50 cycles
10mm x 1200mm
(AW 10)
10mm x 2000mm
(AW 10)
Rotoflex U75
0.75
Single Speed non-gear machine 2800 RPM
220/230 Volts Single phase 50 cycles
12mm x 1500mm
(AW 12/10)
12mm x 2000mm
(AW 12/10)
Rotoflex
1.0
Single Speed non-gear machine 2800 RPM
400/440 Volts 3 phase 50 cycles
12mm x 1500mm
(AW 12/10)
12mm x 2000mm
(AW 12/10)
Rotoflex
1.5
Single Speed non-gear machine 2800 RPM
400/440 Volts 3 phase 50 cycles
15mm x 1500mm
(AW 15)
15mm x 2000mm
(AW 15)
Rotorio
1.0
Three Speed Gear Machine 5700 RPM
8000 RPM and 12000 RPM
400/440 Volts 3 phase, 50 cycles
10mm x 1200mm
(AW 10)
10mm x 2000mm
(AW 10)
12mm x 1500mm
(AW 12/10)
12mm x 2000mm
(AW 12/10)
Rotofettle
1.5
Single Speed Gear Machine 5,800 RPM
400/440 Volts 3 phase 50 cycles
15mm x 1500mm
(AW 15)
15mm x 2000mm
(AW 15)
Rotofas
1.0
Single Speed Gear Machine 12000 RPM
400/440 Volts 3 phase 50 cycles
10mm x 1200mm
(AW 10)
10mm x 2000mm
(AW 10)
Rotofera
1.0
Seven Speed Gear Machine 850 RPM, 1600 RPM, 2100 RPM, 3200 RPM, 5700 RPM, 8000 RPM, 12000 RPM.
400/440 Volts 3 phase, 50 cycles
10mm x 1200mm
(AW 10)
10mm x 2000mm
(AW 10)
12mm x 1500mm
(AW 12/10)
12mm x 2000mm
(AW 12/10)

Ten good reasons why you should select Sunner India flexible shaft machines

1) Easy to operate
2) Continuous duty rating unlike tools with universal motors
3) Available for operation in single phase and 3 phase power supplies
4) Sturdy construction and dynamically balanced pressure diecast rotor
5)
Wide range of power - output and speeds to suit every application and grinding media
6)
Optimum cutting speed under varying load conditions due to constant speed charachteristics
7)
Less than 5% RPM drop from no load unlike 40% or more in universal motor tools and pneumatic tools
8)
High productivity due to continuous rating, constant speed operation, minimum operator fatigue and minimum downtime
9)
Low maintainence cost due to absence of frequent armature burn out or carbon brush cleaning/replacement problems of universal motor tools and clogging of filters of pneumatic tools.
10)
Complete freedom of operation, minimum operator fatigue and easy accessibility to remote and restricted areas of job due to the separation of tool from drive machine unlike universal motor tools and pneumatic tools



PROVIDE POWER CONNECTION TO MOTOR THROUGH STARTER ONLY
Dependable and Long life
Compact and Portable
Copyright © 2006 Hi-Tech Implements. All rights reserved. Designed by Space4web.com